air-source heat pump water heater controller

1.air-source heat pump water heater controller 2.control panel with 3 ways inputs and 3 ways outputs.

Jiangsu Province Jingchuang Electric Co., Ltd --- Elitech

S-3330

The controller is a single system of air-source heat pump water heater dedicated controller, the wired remote and the control board composed of two parts. Wired remote control as a standard installation of 86 panels, the LCD screen displays temperature data, and can modify the control parameters through the keypad; control panel with three-way temperature sensor inputs: temperature sensor, evaporator sensor and exhaust temperature sensors, switch all the way external alarm signal input, the three control outputs:

Compressor Output: Contact capacity 30A/220VAC, direct drive and the following single-phase load 2HP/220VAC

Defrost output:  Contact capacity 10A/220VAC

The remaining work output: Contact capacity  5A/220VAC

Wired remote control in front of protection: IP30

compressor, defrost and evaporator fans. 

Power Supply: 220VAC +10% / -15%, 50/60Hz

Power consumption: less than 5W

Measuring range: -50 °C ~ +120 °C

Control range: 0 °C ~ 100 °C, adjustable

Resolution: 0.1 °C

Measurement Accuracy: ± 1 °C ± 0.5

Sensor fault delay: 10 seconds

Sensor type: NTC sensor,  10K/25 °C

air-source heat pump water heater controller